Centrifugal Glass Lamp Shades Blowing technology is the use of glass in a certain temperature range of the characteristics of plasticity, the use of hollow iron rods from the furnace to pick out the glass, a of people at one end blowing gas, the other end of the glass is blown into a spherical. Centrifugal Glass Lamp Shades At this time can be through scissors, molds and other tools to shape. Blowing operations usually require a couple of people to work together. Although the blowing technology can reflect the distinct individuality, but to a large extent rely on contingency, the limitations are quite obvious. As a result, more artists have shifted their attention to the combination of blowing technology with other technologies. 1, pick up the material to preheat good pipe, Centrifugal Glass Lamp Shades in-depth 1300-degree crucible furnace, not than, not too little. The right heat glass, with heat attached to the pipe, sunglasses, turban, armed, ready to turn your torch, over and over again
2. Molding will be taken into the mold, luck, through the iron pipe will be blown into the glass, support.
3. The edge of the glass with high quality is not cut by hand, of course, because of the increase of the process, the price of the product is not the same, Centrifugal Glass Lamp Shades because the loss of this process is very large.
4. Annealing glass does not let cooling because its surface is contracted by air cooling, but the interior is inflated by heat retention, and rapid cooling can cause pressure to crack.
Comparison of advantages and disadvantages between glass lampshade and PC Lampshade: Now the market has a lot of lampshade, then the glass lampshade is good or PC lampshade, their shape can be customized according to customer needs, whether it is in the home, or in the outdoors, are very beautiful, Centrifugal Glass Lamp Shades the face of these lampshade how do we choose? Here is a look at the advantages and disadvantages of glass lampshade and PC lampshade.
1. The transparency of glass products is very good, as we usually see the glass, in the evening when the light is not obstructed, you can all through.
2. We all know that the bulb will be hot after a long time, some of the bulb temperature is very high, glass products in the high temperature will not have any effect, can continue to use, and there will be no irritant odor emitted.
3. A lot of plastic lampshade used for a long time, the surface will be yellow, affecting the brightness of the light, glass products can be very good to avoid this.
4. Can be painted with a lot of technology, very beautiful.